<nav id="gasoa"><strong id="gasoa"></strong></nav>
  • <xmp id="gasoa"><menu id="gasoa"></menu>
    <nav id="gasoa"><code id="gasoa"></code></nav>
    <menu id="gasoa"></menu>
    <dd id="gasoa"></dd>
    深圳市永恒润滑科技有限公司
    产品导航
    福斯RENOLIN CKC100,福斯CKC150,CKC220,CKC320工业合成齿轮油详细说明?。ㄤ?06次)

    RENOLIN CKC

    High Performance CKC Gear Oils

    High Performance CKC Gear Oils

    Gearboxes designed for the transfer of power or torque can only perform effectively when excessive wear which can occur at high or fluctuating loads, particularly around the reference circle, is avoided. The life of a gearbox depends on the correct selection of the most suitable lubricating oil. The principal function of a gear oil is not just to lubricate bearings and the gears themselves, i.e. to reduce friction and avoid wear but also to provide protection against corrosion, to cool and to seal. The RENOLIN CKC gear oils contain carefully selected base oils and matched additives to protect machinery from undue wear in especially critical boundary friction conditions. RENOLIN CKC products can be classified as CKC lubricating oils according to ISO 6743-6.

    The special characteristics of RENOLIN CKC series lubricants are:

    • High pressure absorption and excellent wear protection
    • Good viscosity-temperature behaviour and excellent low-temperature characteristics
    • Good corrosion protection for steel and nonferrous metals
    • Good resistance to ageing
    • Good compatibility with sealing materials
    • Low foaming
    • Avoidance of frictional vibration by the use of surface-active additives
    • Good demulsification characteristics
    • Multipurpose applications

    Application:

    RENOLIN CKC series oils are recommended for all industrial applications where the machinery manufacturer recommends the use of a CKC type oil. Highly-stressed bearings, joints, pressure spindles, spur and worm drive gears are reliably, effectively and economically lubricated at temperatures of up to 120°C. The use of these oils guarantees the quiet and smooth running of machinery along with optimum operational reliability. The use of these oils also allows drain intervals to be extended. Please consult our Application Engineers for suggestions on how this series of oils can be used to rationalize oil stocks.

    RENOLIN CKC 100 150 220 320 460 680
    Lubricating oil type
    acc. to ISO 6743-6 CKC 100 CKC 150 CKC 220 CKC 320 CKC 460 CKC 680
    acc. to DIN 51 502 CLP 100 CLP 150 CLP 220 CLP 320 CLP 460 CLP 680
    Characteristics Unit Test method
    Colour 2 3 4 4.5 5 5 ASTM D 1500
    Kinematic viscosity
    at 40 °C mm2/s 94.4 145.6 214 331 468 690 ASTM D 445
    at 100 °C mm2/s 11.1 14.5 18.5 24.6 30.8 36.8 ASTM D 445
    Viscosity index 102 98 96 96 95 87 ASTM D 2270
    Density at 15 °C kg/l 0.884 0.89 0.895 0.9 0.903 0.922 ASTM D 1298
    Flash point, Cleveland open cup °C 220 225 230 230 240 245 ASTM D 92
    Pour point °C – 27 - 24 - 21 - 15 – 12 – 12 ASTM D 97
    Neutralization number mg KOH/g 0.33 0.33 0.33 0.33 0.33 0.33 ASTM D 974
    Saponification number mg KOH/g 1.3 0.84 0.84 0.84 0.84 0.84 ASTM D 94
    Sulphate ash % mass 0.1 0.1 0.1 0.1 0.1 0.1 ASTM D 874
    Water content % mass not traceable not traceable not traceable not traceable not traceable not traceable ASTM D 95
    Insolubles % mass not traceable not traceable not traceable not traceable not traceable not traceable DIN 51 592
    Demulsification min < 20 < 20 < 20 < 20 < 20 < 20 DIN 51 599
    Foaming,
    seq. I ml < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 ASTM D 892 seq. I-III
    seq. II ml < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 ASTM D 892 seq. I-III
    seq. III ml < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 ASTM D 892 seq. I-III
    Copper corrosion degree of corr. 1a-100A3 1a-100A3 1a-100A3 1a-100A3 1a-100A3 1a-100A3 ASTM D 130
    Rust prevention pass B pass B pass B pass B pass B pass B ASTM D 665
    Ageing behavior,
    viscosity increase % 1 1 1 1 1 1 ASTM D 2893
    precipitation number increase ml < 0.05 < 0.05 < 0.05 < 0.05 < 0.05 < 0.05 ASTM D 2893
    FZG mechanical gear rig test load stage 12 12 12 12 12 12 DIN 51 354-2
    Effect on SRE-NBR 1 seal material acc to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours,
    relative volume change % 7 7 7 7 7 7 DIN 53 521 together with DIN 53 505
    change in Shore A hardness Shore - 3 - 3 - 3 - 3 - 3 - 3 DIN 53 521 together with DIN 53 505
    上一产品: 美孚SHC XMP320合成齿轮油
    下一产品: RENOLIN UNISYN CLP460,福斯合成极压齿轮油ISO VG680
    版权所有:深圳市永恒润滑科技有限公司 地址:深圳市龙华新区大浪办事处浪口社区华悦路15号
    联系人:唐经理 手机:13530239646 网址:http://www.www.geniwate.com 邮箱:492644086@qq.com 邮编:518000
    关键词:永恒润滑油|壳牌润滑油|美孚润滑油|嘉实多润滑油|福斯润滑油|德国克鲁勃润滑油|道达尔润滑油|加德士润滑油 电话:0755-25264123 传真:0755-25264123
    快3官方